Turnkey line concept for technical profiles
 The Alpha protech complete line concept from Cincinnati Extrusion for the production of technical profiles AT Plast09 Cincinnati Extrusion GmbH, Austria presented the Alpha protech complete line concept for technical profiles, developed in close cooperation with Extrunet GmbH. Alpha protech offers an output of up to 150kg/h, and the profile dies are manufactured to customers’ specifications. The line can be also run in and approved directly at Extrunet, upon request, using materials supplied by the customer. For the complete line, five different Cincinnati extruder models are available to choose from. These include the singlescrew extruders alpha 45, 60 and 75 for processing a wide variety of granulates such as HDPE, PP, ABS, TPE-S or PVC-soft, as well as the Konos 38 and 50 twin-screw extruders for PVC dry blend materials. The entire downstream equipment, starting with a 6m calibration table, can be controlled via a 6" touch display at the front end of the calibration table. The PLC control system can be operated in six different languages and adjusted to customers’ specific needs. As haul-off units, either a belt haul off or a caterpillar haul off are available, both operating with a maximum haul-off speed of 20m/min. The caterpillar haul-off is recommended for profiles with special contours, since it can be perfectly adjusted to the form of the product. The haul off is followed by a saw as cutting device, with a standard saw blade 300mm in diameter, or optionally 400mm in diameter. Using a PLC-controlled cutting program, up to six different cutting lengths and numbers of units can be pre-set. A tipping device is mounted at the end of the downstream unit. A number of optional extras are available, also tailor-made to fit into the complete package. These include an additional vacuum pump, a water/air separation tank including vacuum and water pumps, a water treatment system and a saw equipped with a servo drive for higher cutting accuracy. |
|
Company: |
Cincinnati Extrusion GmbH, Austria |
Fax: |
+43 1 6100 6292 |
Email: |
|
Website: |
|
