« READ ANOTHER

High-speed saw and automatic deburring machine

KENT Corporation’s new Bewo high-speed cold saw, model SCF-90, cuts one to six tubes simultaneously, providing cut rates of up to 11,000 per hour.

The saw head cuts upward, which leaves most chips below and requires less cutting force.

The fully hydraulic helical saw head is robust with minimal backlash. The tubes are fed via servo feed to ensure accuracy and enable up to ten different lengths to be cut from a single stock length of tube.

The main control panel automatically selects the most efficient settings based on the entered job. All settings are automatically controlled at the panel. The Bewo Quatro can be expanded with 100% compatible machines and systems for de-burring, measuring, washing and stacking.

The high speed saw is capable of processing tubes from 0.315" to 3.5" (8 to 90mm) outside diameter. Kent offers full sales, service and parts support for new and used Bewo machines in North America.

Kent Corporation has also developed a new Burrmaster de-burring machine to automatically de-burr the ends of mitre cut tubes, bent tubes, or straight tubes. The Rotoburr de-burr uses a 12" diameter x 6" wide spinning brush, and the head also rotates. This double action enables an operator to quickly and consistently de-burr the end of the part without having to spin it.

A quick adjust work rest makes changeover quick, and automatically puts the part on centreline of the brush. The machine has an optional powered table and clamping device that is suitable for processing mitre cut or bent tubes.

The machine can be used for cell type applications and can be loaded via optional robot. It also is available with a variable speed brush for processing either ferrous or non-ferrous material. It is capable of processing tubes, bars, or extrusions up to 6" (152.4mm) crosssection.

+1 440 237 5368

DeanC@kenttesgo.com