HSS-based saw blade
THE Swiss company SW Wil has developed a new kind of HSS-based circular saw blade, the PowerBlade 65. Using a HSS vapour blade it is possible to cut up to 380 N/ mm2 with a moderate cutting speed. With a standard HSS blade and a common AlTiN PVD coating users are able to cut up to 450 N/mm2 with a good lifetime and cutting speed. TCT saw blades are normally used above 650 N/mm2. For the gap between 450 to 650 N/mm2 there was no circular saw blade available offering an optimum solution for cutting tubes and bars in this range. SW Wil is now putting a complete new HSS saw blade on the market with a special HSS body and a coating system featuring a much higher oxidation resistance than any other one in the market. The PowerBlade 65 is setting a new standard in the line between 450 to 650 N/mm2. |
|
Company: |
SwissCut SW Wil AG, Switzerland |
Fax: |
+41 71 911 4932 |
Email: |
|
Website: |
|
